This project was started in , electronics and control loops. Because I always need a cool project to learn new things, it was clear that something that can fly had to be built.
The project started as a "tricopter-only" project, but as I wanted to build smaller vehicles with more payload capacity, I decided to make some quadrotor, hexacopter and Y6 hexacopter firmwares too. My main interest is to build very small MAVs that fly as good as larger ones (or even better) and that can be controlled by wireless video link. I also experimented with autonomous flight in GPS-denied areas (video), and with GPS assisted autonomous hover (video).
-- William

Contact: Shrediquette @ g m x . d e --- All content published under CC Attribution-Noncommercial-Share Alike 3.0 Germany

Shrediquette DERBE ... almost there...

Here are some images of my racing copter. Some soldering of the ESCs etc. still has to be done. I am also waiting for some resistors and capacitors for my flight controller to arrive... But I guess the maiden flight will be this weekend :-D.




4 comments:

  1. Briljant idea , looking forward to the finished produkt !

    ReplyDelete
  2. So all the point which as you mention i am totally agreed.
    Thanks for your kind information.
    gclub
    goldenslot
    gclub casino

    ReplyDelete