IMAV2011 - Team AKAflieg Bremen successful


Results:
  • 1st place indoor pylon challenge
  • 1st place indoor exploration mission
  • >= 4th place outdoor mission
  • Special award: KLPD user trophy (best operational MAV)
  • 2nd place endurance mission


The 12th -15th of september 2011 was IMAV time again... The IMAV2011 is an international conference and flight competition for micro air vehicles. This year it took place in 't Harde (The Netherlands). We (a group of five hobbyists that are also members of the academic flight club Bremen) participated in the outdoor and indoor competitions, and I also had the opportunity to give a talk about some of my PhD work.
Antenna tests
I took my BOLT with me, and Tumba, one of my team members, took his "Zecke" and a fully autonomous "Ninja" to the competitions (his copters are also 100% built from scratch). For the outdoor competition, we had to fly 500m away and identify some things. With our standard video equipment, this seemed to be impossible, so we asked Sebastian Seidel from GlobeFlight for help. He kindly provided two diversity systems (ImmersionRC DUO5800 v2), two 12dBi directional antennas and two monitors. We tested the equipment on the ground (see image) and in the air, and got a perfect image over ~500m distance (remember, we are restricted to use 25mW AV-transmitters here in Germany). A big thank you goes out to Sebastian for his important support!!


Indoor Pylon Challenge
 
Tuesday was the first day of competitions. There were two indoor competitions: In the first one, the mission was to fly as many "8's" around two pylons in three minutes. Many teams participated with the Parrot AR drone, which seems to be a reliable, extremely stable and robust platform. The drone was extended by some extra code by many teams, so that they were able to fly some rounds around the pylons autonomously. That was pretty impressive. We have also seen some very nice "coax-flying-things" (well, I think there is not really a name for it...), that had an brilliant flight performance. And then, there was a quadrotor that was equipped with a laser scanner. This thing was also flying fully autonomously, and I think it was the fastest autonomous robot in the competition. Very nice work!
Demo flight
We participated with the BOLT and the Zecke, I managed to fly 32 rounds in three minutes. People seemed to be impressed by the flight speed of the BOLT, and they asked me to do an extra demo flight with the FPV image being displayed on a big screen. An autonomous flight will give you 12x more points than a flight that is controlled by FPV, but with the high speed and the small size of the BOLT, we managed to receive the first prize for the indoor pylon challenge.
The impressive MAVion Roll & Fly
 Indoor Exploration Challenge
The second competition was called "indoor exploration mission". The task was to enter a building, find and identify two patterns, pick up a target and leave the building. The target has to be dropped in the "drop-zone", and a precision landing has to be done. We always attempted the missions with two independent copter systems (Zecke and BOLT).
In preparation for the IMAV competition, the BOLT was equipped with an extra 180° servo and a small hook, so a target could be picked up and dropped. I managed to enter the building through the chimney, identified both patterns, took up the target and left the building through the door. The target was dropped in the correct zone, but unfortunately, the downwash of my copter blew the target away. It seems that no other team attempted to pick up a target. In the end we also received the first prize for this competition (that was a big surprise for us).

A video of the indoor exploration challenge with Shrediquette BOLT:




Outdoor Mission
The outdoor mission was also very interesting. Actually, I wanted to compete with a flying wing, because I can fly very far away with such an aircraft, still having a very good video link. I modified my copter code, so that the aircraft can be controlled in "acro-mode" (that means that I am controlling the angular velocity of roll and pitch of the airplane). Some tests have shown that this really works well, in very windy and turbulent situations, the aircraft is still very easy to fly.
Flapping wing from Egypt, arch & balloon
But after the indoor competition, many people asked me to fly the BOLT also outdoors. The problem is, that I only have one video transmitter and one FPV camera, that means that I always need to change cam + av transmitter from one aircraft to the other. And that takes quite some time. I know that the BOLT flies very well in windy and turbulent conditions, so I decided to attempt some mission elements with the copter. The flying wing was left in the hotel room.
My team decided that I should take-off first, fly through the arch and do the precision landing. After that I took off again and tried to hit a huge balloon. Well, it was clear that my copter is not going to win this fight (see the official video) - I hit the balloon, lost a propeller and smashed into the ground. Two points! ;-D.
Team AKAflieg Bremen

Indoor team

Tumba then took off with his autonomous "Ninja". Although there was quite some wind (and also worth mentioning: Tumba doesn't have a compass on board...), his copter did a perfect flight in ~450m distance. Tumba became a bit nervous, because it was impossible to see the copter anymore... But fortunately, we had a perfect video link, so we could locate a vehicle and count the number of persons leaving that vehicle.
We couldn't get one of the prizes for the outdoor competition, but we were really happy with the results. The "Deutsches Zentrum für Luft- und Raumfahrt (DLR)" won this competition (they came with about 15 people and several AscTec Pelican and Falcon 8 copters). They really did an amazing job and had a very good strategy. ENAC paparazzi reached the second place. They had very nice aircraft which performed really well and these people really know what they are doing. The third place was reached by the KLPD / NLR / Royal Netherlands Army team, they also master the controls of their aircraft.
Our teams MAVs
 Best operational MAVs
At the end of the competitions, we additionally received a special price from the dutch police for the best operational MAV system. This is a great honor in my opinion. That was really cool, the trophy is huge and all our copters fit into the cup. Very handy...
Best operational MAV system trophy

There are two errors hidden in this image... Who finds them?

I really would like to thank the organizers of the IMAV2011, it was really fun, I had a lot of exciting and inspiring discussions, and we have seen many great and innovative MAV platforms. See you maybe next year in Braunschweig at the IMAV2012!

Official IMAV2011 video:


Comments

  1. Errors in the image... I only found one so far: What is a "Tropfy"?

    ReplyDelete
  2. And probably your 35 MHz antenna is broken... ;)

    ReplyDelete
  3. and no front-right-bottom prop

    ReplyDelete
  4. Hello.
    Congratulations for this success! I understand that your MAV were "video controled" (FPV). You won with 12 times less points than "autonomous mission control" MAVs?

    Do you know if the scoring of all team is available? I did not found this on the IMAV website.

    ReplyDelete
  5. Hi Leon,
    yes my copters are controlled via FPV. Autonomous flight requires quite some stamina, money and time. For a hobbyist, this is pretty hard to do (although I managed to fly autonomously indoors and outdoors already, but it is not working reliable enough for the IMAV). What is also important, is the fact that autonomous flight isn't any fun anymore once it is finished. And for hobbyists, everything is about fun, isn't it? Autonomous flight got 12 times more points at the IMAV2011. But the size factor also matters. My copter is pretty small, so I only had to fly ~5 times faster than the autonomous copters.

    ReplyDelete
  6. Hi! First of all, congrats to the imav- you really smashed ´em-again! Second, i have been hanging around this site for quite some time and i finally want to build my own tricopter primarily for FPV flying(oh and for getting some hands on experience on automat. control). It should look very much like your DLXm, where you used Roxxy2216/25 motors, 5x3 blade GWS and the turningy plus 6A ESCs. If I may ask, would you still recommend using this combination of Motor/Prop/ESC, or should i use something else on this weight class? Note that i am still on a student budget:-) have a nice day - rookie

    ReplyDelete
  7. Hi rookie,
    I think the combination is pretty good. But it is not the cheapest solution. But from my experience, cheap motors (<= 8 euros each) seem to have a lower efficiency. And I also noticed that cheap motors are never the same - some motors have more windings, some have less. That could be a problem if the control loop of your copter can't deal with this.
    I think you know that 3-blade props generally have a lower efficiency than 2-blade props. So it would be better to use e.g. 6x3 2-blade props instead of 5x3 3-blade. But that increases the total size of the copter...

    ReplyDelete

Post a Comment

Popular posts from this blog

My 15 inch long-range setup for 2020 (with CAD files)

Part 1/3: Side Force Generators (SFGs) in FPV Racing

Finished I²C to PWM converter and TriGUIDE mini

Part 2/3: Side force generators - Forces and turning

Aerodynamics in racing multirotors!